It's tough to get a 4-legged anything to sit absolutely flat. If you want stable, just ditch the rear feet and put a single rear foot at the rear center, leaving the two front feet (or tilt bail) as-is. Tripod is stable.
On Wed, Jan 12, 2011 at 8:49 PM, Dan Grizzard <[email protected]> wrote: > I just hate the new Verizon email format. Here I go again! > > My K2 has developed a warping issue. Recently completed and finally totally > assembled the unit does not set flat on the desk or stand. It wobbles. I > have loosened the 3d connector screws, set heavy books on the rig on a > marble top table and then re-tightened the screws. The rig then sits flat > with no wobble. The next morning the warp is back. Has anyone had this > issue? > Thanks in advance for your input. > 73 > Daniel Grizzard > Extra Class > af4lb > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
