John, That's a strange one. The transverter gain is supposed to default to 25 dB. If you can't adjust it with MENU:XV Gain, then you might try the "Parameter Initialization" procedure on page 24 of the manual.
Alan N1AL On Sun, 2011-01-16 at 16:17 +0000, G3XDY wrote: > I have downloaded the new Beta for the K3 and P3, all seems to be working OK > on the HF bands, but I seem to have a problem with the P3 when using my 23cm > transverter on Xvtr Band 4 (converting to 28MHz). On all the other bands I > can get the usual panadaptor and waterfall displays, but on 23cm there is no > spectrum display on the panadapter (for any signal level or ref level) but > the waterfall turns bright red across the screen. When first powered on I > can see what looks like a correct display for a second or two, then it > disappears. The P3 transverter gain calibration setting does not appear to > do anything, having selected band 4, pressing the knob again gives an > onscreen display of "nan" and turning/pressing the select knob has no > effect. Anyone seen similar symptoms? > > 73 > > John G3XDY > K3 #689 > P3 #514 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
