The CW width is always the setting it was on when I turned off the radio. It never resets. The 400 Hz is there so there is something in the slot the first time the radio is used. It is saved by band, so you will run into it first time on a band. Just set it where you want it. It will keep it. If you hit XFIL button to change bandwidths, it will use the bandwidth you stored with the K3 config utility, or stored using the CONFIG menu entries for that filter. Utility is a lot easier to set up filters.
What did you put in the bandwidth for filter 5 entry on the K3 Utility configuration tab, configure crystal filters button? 73, Guy. On Wed, Jan 19, 2011 at 10:48 PM, Scott Dickson, W5WZ <[email protected]> wrote: > Hi All! > > I'm a new K3 owner (#0251) as of last Friday. I have successfully obtained > and learned how to use most of the features in: > K3 Utility software > K3_EZ software > > Using K3 Utility, I checked for latest versions of all firmware, and > successfully loaded to the K3. > > My K3 has the following filters, installed in the correct positions and > correctly listed on the crystal filter section of the K3 Utility software. > 13kHz > 6kHz > 2.8kHz > 2.1kHz > 1.0kHz > > I have both a C3 and D9 version of the owners manual, and have not yet > found > the answer to my question in either of them. > > When in CW mode, the K3 defaults to the FL5 (1.0kHz) filter, and sets the > BW > to 400Hz. I was wondering if or where that default BW setting could be > altered? I know the BW can be changed with the WIDTH knob. > > --Scott, W5WZ > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
