FL5 is configured as a 1.0khz the K3 Utility configuration tab, configure crystal filters button.
--Scott, W5WZ _____ From: Guy Olinger K2AV [mailto:[email protected]] Sent: Wednesday, January 19, 2011 22:28 To: [email protected] Cc: [email protected] Subject: Re: [Elecraft] Setting K3 default filter BW The CW width is always the setting it was on when I turned off the radio. It never resets. The 400 Hz is there so there is something in the slot the first time the radio is used. It is saved by band, so you will run into it first time on a band. Just set it where you want it. It will keep it. If you hit XFIL button to change bandwidths, it will use the bandwidth you stored with the K3 config utility, or stored using the CONFIG menu entries for that filter. Utility is a lot easier to set up filters. What did you put in the bandwidth for filter 5 entry on the K3 Utility configuration tab, configure crystal filters button? 73, Guy. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
