Don, Your help is, as always, clear, concise, and greatly appreciated. I measured the depth of the screw holes carefully, and they are too short. I will see if Elecraft will replace it.
I checked the headphone switch for continuity as you suggested. It seemed okay. I installed the K2 top, and the speaker now works. I reinstalled the KPA100, and it too works. I must have not had the speaker plug installed properly. I think I will try using amplified speakers that have a separate headphone jack to save wear on the K2 one. I will order a XG2 kit to test the receiver as you suggest. Thanks, Mark Mellish -- View this message in context: http://elecraft.365791.n2.nabble.com/k2-kpa-100-speaker-problem-tp5950036p5953222.html Sent from the [K2] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
