Chuck, That sounds like WINMOR is issuing mode commands along with the TX command that are not compatible with the K2 Programmers Reference. I would suggest you take that up with the WINMOR author. If he states that WINMOR implements K2 support, that should be brought to his attention. If he is only implementing Kenwood compatibility, there are some command sequences that work OK with Kenwoods, but do not work with the K2. Compatible does not mean equal.
In the meantime, you might want to consider another way to initiate transmit on the K2. The "simple one transistor keying interface" comes to mind. 73, Don W3FPR On 1/27/2011 7:51 PM, 2Cents wrote: > Is anybody running WINMOR with a K2 and SignaLink? If so what are your > transmitter settings in WINMOR and how are you keying the K2? If I try > using my com port for PTT it does key, but it also steps the radio to the > mext mode, which is problematic. Any insight would be appreciated. > > 73 > > Chuck, NN7U > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
