I'm using RMS Express on a K3 with up to date firmware. There are also issues with K3's, where the AP performs a bunch of serial commands that cause a 300-500 mS delay (probably a band change as seen by the K3). So the first TX begins before the last command is processed, and only the trailing edge of the audio-in is sent. The next TX is fine, so are others following. For the K3, you just lose the first one. It could be that this same problem with the AP causes a different reaction on the K2 (haven't checked mine yet).
For my MARS RMS Winmor node, I have it set up to use VOX. The rig is a JRC JST245 (rather dated, but good reliability) that only supports 4800 BPS on the serial port. This allows frequency control, but isn't fast enough to use for TX. If you have a complaint about any of the supported radios in RMS Winmor, better address them to Rick Muething soon. He's off on other projects now, and it's not clear if that group has any sustaining staff. For the K2, I'd just use DTR or RTS as a hard-keying line to the PTT. You might have to put a 2N390x or some other switch transistor in the PTT path to handle any inversion and drive. 73, matt W6NIA / NNN0UET On Thu, 27 Jan 2011 16:51:29 -0800, you wrote: >Is anybody running WINMOR with a K2 and SignaLink? If so what are your >transmitter settings in WINMOR and how are you keying the K2? If I try >using my com port for PTT it does key, but it also steps the radio to the >mext mode, which is problematic. Any insight would be appreciated. > >73 > >Chuck, NN7U > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
