Hi Folks,
After watching the progress of APF for a few months I decided it was time to
upgrade to the latest firmware (4.25) and give it a try. When pressing the
DUAL PB there is a LOUD clip and the CW is gone. Turning the SHIFT control
products one LOUD clip for each 50 Hz step. I went to CONFIG and could not
find DUEL PB to ascertain APF was selected. Now this gets complicated so
follow closely. There is no DUEL PB in the VFO B space between DIGOUT1 and EXT
ALC as the latest manual (D9 - Pg 55) indicates there should be. However, when
EXT ALC is selected APF is show in VFO A. It appears that in my K3 all values
in the second column of the manual (displayed in VFO A) beginning with EXT ALC
is shifted up one entry from the first column of the manual (displayed in VFO
B). BTW, turning VFO A knob does change the VFO A display from APF to DUEL PB
and back again when in EXT ALC.
I have taken a picture and will be happy to display it someplace if anyone is
interested in seeing it.
I've read the verbiage on page 35 about APF and there is nothing there that
seems to help. Anyone have any ideas or can tell me what I'm doing wrong.
Take pride in the USA. 73
Jim, W0EM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
