Make sure that the front panel code is also updated. The proper version for 4.25 is 1.14. Also make sure the proper DSP table is present when you update; it should be DTBL0014.HEX. If all the versions aren't synchronized you can have problems like you describe.
On 1/29/2011 2:27 PM, Jim Harris wrote: > Hi Folks, > > After watching the progress of APF for a few months I decided it was time to > upgrade to > the latest firmware (4.25) and give it a try. When pressing the DUAL PB > there is a > LOUD clip and the CW is gone. Turning the SHIFT control products one LOUD > clip for > each 50 Hz step. I went to CONFIG and could not find DUEL PB to ascertain > APF was > selected. Now this gets complicated so follow closely. There is no DUEL PB > in the VFO > B space between DIGOUT1 and EXT ALC as the latest manual (D9 - Pg 55) > indicates there > should be. However, when EXT ALC is selected APF is show in VFO A. It > appears that in > my K3 all values in the second column of the manual (displayed in VFO A) > beginning with > EXT ALC is shifted up one entry from the first column of the manual > (displayed in VFO > B). BTW, turning VFO A knob does change the VFO A display from APF to DUEL > PB and back > again when in EXT ALC. > > I have taken a picture and will be happy to display it someplace if anyone is > interested in seeing it. > > I've read the verbiage on page 35 about APF and there is nothing there that > seems to > help. Anyone have any ideas or can tell me what I'm doing wrong. > > Take pride in the USA. 73 > > > > Jim, W0EM > > > > ______________________________________________________________ Elecraft > mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: > http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net Please help support this email list: > http://www.qsl.net/donate.html -- Vic, K2VCO Fresno CA http://www.qsl.net/k2vco/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
