I checked the encoder and it was connected properly. I can't help but thinking I'm doing (or not) doing something right. Seems easy enough.
If this hasn't been a commonly made mistake, I have to wonder about the encoder at VFO B. 73 Dohn Smythe N8EWY [email protected] ----- Original Message ----- From: Phil Hystad <[email protected]> To: Dohn Smythe <[email protected]> Cc: [email protected] Sent: Sun, 30 Jan 2011 19:14:45 -0000 (UTC) Subject: Re: [Elecraft] K3 Stumped. I would check connections on the VFO B encoder with the circuit board or look for a short. Then, if that does not show anything, give up. Actually, I would give up -- my next step being to call Elecraft support. Or, alternatively, call Elecraft support first. Good luck, 73, phil, K7PEH On Jan 30, 2011, at 9:37 AM, Dohn Smythe wrote: > Fellas, > I am firing up my K3 for the second time. I wanted to begin to do the > synthesizer calibration. > > When I tap Menu, it goes to "LCD CRT" and can be adjusted by VFO A. I CANNOT > access any other menu item. > > When I hold CONFIG, It says "CONFIG" briefly in VFO B window and as soon as I > let up, I am in the "TIME" configuration. It can be adjusted by VFO A as it > should. BUT when I turn VFO B it WILL NOT switch out the config menu. It > won't go from one config item to another. > > For some reason, my VFO B does not seem to be responding. I'm sure I'm doing > something wrong. > > I have not done anything else. Should I download updates and install them > first? What am I missing? Something simple I hope. > > 73 > Dohn Smythe N8EWY > [email protected] > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
