Dave, I was really surprised to see another poster say that you should kill the power on the K3 after installing new firmware. I have two K3's here, have never done that and have never, ever had any trouble whatsoever with firmware installations.
In my experience, going on 3 years, it's not necessary to restart the K3 after firmware upgrades. 73, Tom Childers Radio Amateur N5GE Licensed since 1976 QCWA Life Member 35102 ARRL Life Member Retired Professional C# Software developer http://www.n5ge.net On Mon, 7 Feb 2011 08:34:17 -0500, "David Robertson" <[email protected]> wrote: >Everyone, >Many times by both the K3 engineers and others it has been stated to recycle >the K3 power after doing a firmware upgrade. I understand the logic behind >this action and do perform a power reset after doing a firmware upgrade or >reload. My question is this. Every time a firmware upgrade is installed there >are several apparent power resets that occur, even after the firmware install >is finished. Am I correct in assuming these apparent power resets are not >complete resets? > >Thanks and 73 >Dave KD1NA [snip] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
