Bob, One thing that I failed to add, and might be a concern to you at first. It is normal for the K2 to take 2 to 3 dit times to come up to the full requested power after a change in the power knob setting, a change in bands or a power on.
73, Don W3FPR On 2/10/2011 4:00 PM, n7zf wrote: > This is a new build of a rev A K2 (installed rev B mods), rework eliminators, > no options installed, several other mods installed including the CW waveform > keying mod (VALC circuit). Receiver is working well. > > If I set the output power to 5 watts, the usually K2 reports the power as > 4.2 watts or 6.3 watts -- sometimes 5.1 watts. I am seeing some unexpected > things in the ALC circuit on the control board and am wondering if the ALC > is causing the transmit power to fluctuate. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
