Good morning, I have an Elecraft K3 running it in DATA A mode line out on rig (controlled through MIC gain) is set to 2 any more and ACL rises to high the output is 2 watts. I have been on 20 and 40 meter WSPR without any troubles. Within the past 2 weeks have been working on 30 meters WSPR and not having any luck. One thing I did notice today was when set up on 30 meters and line out at still set at 2 also power at 2 watts but watt meter (LP-100A) is showing no output. Now if I increase the line (turn up MIC gain in the K3 case) at level 5 or 6 I am getting about 1/2 watt and that's it. I don't feel I should have to re-adjust sound card settings for 30 meters when all is well with 20 and 40 ??
Any thoughts?? Mike VE3WDM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
