What is the K3 macro command set for setting power? I would think if I had that info I could also build a macro in HRD.
Don KD8NNU On Sat, Mar 12, 2011 at 1:53 PM, K8AC wrote: > At least one logging package, DXLab, provides the necessary > conditional > statements that allow you to build scripts attached to buttons or > sliders > that can accomplish this. For example, I have one button that appears > in > the "Commander" (the DXLab application that does PC to K3 > communications) > window that reads the band the K3 is set to and then sets the power > out to > the value that produces just under the legal limit for my amp on that > band. Using the same facility, you could define a "slider" control > that would > increment or decrement the power level by a fixed value each time it > was > moused. Or, you could drag the slider to set any desired power level. > Since standard K3 commands are used, when the power level is changed > via one > of these controls, the new power level is displayed on the VFO-B > section of > the display just as if you had turned the PWR knob. > 73, Floyd - K8AC > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/Macro-for-Power-Output-tp6164356p6164855.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
