Dear folks: I am using, for the first time, a KX-1. The antenna, as recommended on the Elecraft FAQ page, is a 24 foot wire and a 16 foot radial. They are connected to the KX-1 with a BNC to a double banana plug.
I am on the road from time to time and spend a number of evenings in hotel rooms. Earlier this week, I fired up the KX-1 for the first time since purchase. I took the 24-foot antenna and dropped it out the 6th floor window. That gave me about a 2 to 3 foot horizontal run to the window and the remainder straight down. The radial was spread out in the opposite direction along the "dresser" and then dropping down to the floor for the duration. Turning it on, I heard absolutely no signals on 75, 40 or 20. Today, I was outside and spread out the antenna and radial in a horizontal fashion at about a 45 degree angle to each other. Signals were heard on 20, but again, nothing on 40 or 75. What suggestions do the seasoned KX-1 users have? Thank you VERY much Arnie W7BIA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
