Chris, I would try loading ALL the firmware again - using a real serial port if that is possible. You could have a bad USB to serial adapter that corrupted the load.
If all else fails, there is always EEINIT - hopefully you have a saved configuration! 73, Don W3FPR On 3/25/2011 10:22 AM, Chris Page wrote: > Sorry Guy, I should have said, but yes, I am using the latest version > (1.4.1.8) > > of the K3 Utility program. > > 73 de Chris, N4CJ (G4BUE) > > On 25 Mar 2011 at 9:44, Guy Olinger K2AV wrote: > > Shooting in the dark, but you did not indicate the version of the K3 utility. > Particularly since you went so long without updating the firmware, did you > upgrade the K3 utility as well? That would be required before updating the > firmware. 73, Guy. > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
