Thanks Don but I have tried both loading all the software again,and the EEINIT option!
I haven't tried reloading the software from a computer with a proper serial port as I don't have one! 73 de Chris On 25 Mar 2011 at 10:30, Don Wilhelm wrote: > Chris, > > I would try loading ALL the firmware again - using a real serial port if > that is possible. You could have a bad USB to serial adapter that > corrupted the load. > > If all else fails, there is always EEINIT - hopefully you have a saved > configuration! > > 73, > Don W3FPR > > On 3/25/2011 10:22 AM, Chris Page wrote: > > Sorry Guy, I should have said, but yes, I am using the latest version > (1.4.1.8) > > > > of the K3 Utility program. > > > > 73 de Chris, N4CJ (G4BUE) > > > > On 25 Mar 2011 at 9:44, Guy Olinger K2AV wrote: > > > > Shooting in the dark, but you did not indicate the version of the K3 > utility. > > Particularly since you went so long without updating the firmware, did you > > upgrade the K3 utility as well? That would be required before updating the > > firmware. 73, Guy. > > > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
