All XG3 amplitude references refer to the amplitude of the fundamental frequency component only.
Bob, N6CM On Thu, Apr 14, 2011 at 9:09 AM, Tony Estep <[email protected]> wrote: > On Thu, Apr 14, 2011 at 10:32 AM, Ron D'Eau Claire <[email protected]> wrote: > > > A square wave's frequency.... > > > > > > > Ron, I think John is aksing about the calibrated power (John, correct me > if I'm mis-stating here). If there are infinite harmonics each > with amplitude = 1/N, then 1/2 of the total energy will be at the > fundamental freqency, and 1/2 will be in the sum of all the higher > harmonics. So if you say that the output is, say, 1 mW and the frequency > is > 1 MHz, does that mean that there is 1mW of output at 1 MHz and another 1 mW > of output in the harmonics? or what? > > Tony KT0NY > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
