Jim, I would rather suggest you look at LP-Bridge by Larry Phipps. It allows multiple software applications to use the same com port.
73, Don W3FPR On 4/27/2011 1:01 PM, Jim Campbell wrote: > I have tapped into the K2's IF and am sending the resulting signal to a > Softrock. The output of the Softrock is fed to a CW Skimmer. The K2's > control cable is used by CW Skimmer to display the K2's current > frequency. The connection is bi-directional as the CW Skimmer can > command a change in the K2's frequency. > > I am using MixW3 as my logging program. I would like to feed the > frequency info coming from the K2 to MixW as well. Is it possible to > accomplish this by tapping into the K2's cable and extracting the RXD > and GND signals to be sent to a different COM port that is used by MixW? > The OS (Win 7 Pro) won't allow both CW Skimmer and MixW to use the same > COM port. > > Thanks and 72, > > Jim - W4BQP > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
