I just looked at a K2 RF Board and it leads me to think you are trying to place C45 in the wrong spot - there are only 2 holes where C45 is to be inserted - the position is to the rear of the board from the 'C45' label and right next to the relay.
Yes, spread the legs of the small capacitor to fit the hole spacing. That action is necessary for several of the capacitors in the bandpass filter area. 73, Don W3FPR > -----Original Message----- > > Hi: > Similar to cap C6 on page 57, do I install cap C45 in the outer two of > the three holes? > The marked outline suggests that, but that middle hole seems placed > ideally for the lead spacing of the supplied part. > 73, > VE8JJ > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.323 / Virus Database: 267.6.4 - Release Date: 6/6/2005 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
