On 5/15/2011 12:44 AM, Ian White GM3SEK wrote: > I came to the P3 from an SDR-IQ using a 15in second monitor [1], linked > to the K3 and N1MMLogger through LP-Bridge. For the moment, the much > tighter integration between the P3 and the K3 (particularly the tracking > cursors on*both* VFOs) overrides the need to peer at a small screen > that is lacking in detail.
Before going too far down the trail about lacking detail, it's important to realize that resolution is also limited by the FFT parameters used to process the complex IF signal and convert it to the frequency display. According to N1AL, here are 468 active FFT bins. I haven't seen numbers for the frequency and time resolution of the FFT process, but the upper limit of frequency resolution is (F2-F1)/468. FWIW, I'm quite happy with the P3 display, and only wish it were smaller (that is, less depth front to rear) with a swiveling bracket to mount it to the underside of a shelf above my rig. 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
