On Sun, May 29, 2011 at 7:17 PM, <[email protected]> wrote: > Gents > > Would someone who is using the WSPR software share how they have the > setup configured for the K3. > > I can not get it to go to TX....
Don, It sounds like you have it receiving. In case you don't: No interface is necessary, and things are simpler if you don't use one. Just connect line out on the back of the K3 to mic in, and line in to speaker out. Once you get it receiving, it's time to transmit. The first thing is to get PTT to work, which apparently is where you are stuck. In WSPR, set PTT method to DTR. Set PTT port to the Com port that you are using to connect the K3 to your computer. Ignore CAT for the moment. Save the setup and put WSPR into idle. Set the transmit slider to 5%; this will make test transmissions 5 seconds long. Put the K3 in USB mode, and press Tune. The K3 should go into transmit. If not, the DTR line is not getting to the K3 for whatever reason. If it doesn't work, at least you know where the problem lies. In my case, the USB/serial port adapter I'm using delivers signals over DTR and RTS. Hopefully, yours will as well. Once you have PTT working, go back and set up CAT. The only thing CAT does with WSPR is set the K3's frequency correctly in response to a band change on the WSPR console. This is easy to test, and if it doesn't work, no harm: just set the frequency by hand to the value shown in the Dial: box. When you get to this point, the only thing remaining is to set levels. Set the computer's Mic level for 0 db received noise when the green Receiving light is on, and the computer's Speaker level so that ALC shows 3-4 bars but never 5. You will probably have to set the K3's Configure>Line In to a low number, maybe 003 or so. HTH! 73, Tony KT0NY ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
