I understand that when using the K3EXREF there is no need for this data. But, what I was wondering is if this would be a method by which an end user of the KTCXO3-1, (or Elecraft internally) could use this or a similar method to compile this 1 degree increment data easily? It could be used when not running with the external ref online, or could be included as test data from Elecraft with a KTCXO3-1 purchase.
I am also interested in the K144XV's PLL being corrected by the K3EXREF, and hopefully, an automated correction instead of the 116MHz/118MHz manual calculation and data entry now required when using the K144RFLCK. 73, Bruce N1RX > There is no need to do any type of temperature correction if you're > using the K3EXREF. This option uses an external reference to send > corrections to the K3's MCU automatically so that it always knows the > actual frequency of the 49-MHz oscillator. > What some are asking for is that the K144XV's PLL module also receive > the benefit of this correction when the K3EXREF is installed. That's a > small matter of programming on my part. > 73, Wayne N6KR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
