The other problem with adding boots to the XG3 is key clicks. As I understand it, there is no key shaping. Not a problem with a 1 mw transmitter but it might be objectionable with 20 watts.
Alan N1AL On Sat, 2011-06-25 at 10:00 -0400, Joe Subich, W4TV wrote: > > So, I am asking the list: "Is there any interest out there amongst XG3 > > owners in having Elecraft bag up a partial kit as outlined above?" > > If such a kit was to be made available, I would suggest a gain block > capable of operation on the three highest bands (28-148 MHz) with the > necessary LPF values for each band. > > I'm also not sure that a kit should be capable of much more than 1 W > output as a bunch of 20 W signals with fairly high levels of phase > noise would not be exactly welcome on most bands. > > 73, > > ... Joe, W4TV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
