On 7/23/2011 2:30 PM, Don Wilhelm wrote:
> I believe those instructions have an error - it seems to tell you to set
> "Ways to send" to Character out - which would send KY commands with
> ASCII text to the K3. I believe "Ways to send" should be set to Line
> Out instead.
This is a case where English is not the programmer's first language.
"Way to send" is referring to sending characters as at time, word at
a time (hold characters until a space is entered), or line at a time
(buffer until an "enter" <CR> character is typed). "Character Out"
(letter at a time) is the default for MMTTY but some operators prefer
to enable diddle (check LTR in the Diddle box on the Set-up TX tab)
and select "word" or "line" to minimize the chance that noise will
corrupt characters within a word/line.
73,
... Joe, W4TV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
