I have considered using the P3 with my mobile K3 for noise hunting, but my thought was to use it with a K3, not with a direct input to the P3 from an antenna. I think that might be a good idea if you ran across a strong signal.
73, Tom Amateur Radio Operator N5GE ARRL Lifetime Member QCWA Lifetime Member On Sat, 23 Jul 2011 11:56:35 -1000, Merv Schweigert <[email protected]> wrote: >Has anyone used the P3 for an "external" signal finding or noise >finding tool? >I was wondering if a tuned circuit for 1.8 mhz fed into the input >with the IF set for 1.8 would be enough to show any signal? > >I need to locate a signal on 160 meters that is caused by two BC >stations mixing due to a connection being made when the wind >blows and something contacts and creates a "diode" in my antenna/ground >system. > >Thanks 73 Merv K9FD/KH6 >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
