Evening Everyone, I am totally done with the control panel, and right at the resistance check part of the front panel on my K2. On some of my readings, I am not getting a reading at all. I have a Meterman multimeter. When the probes are crossed, 0.4 or 0.5 Ohms are considered "zero" or "ground" on my meter. I am getting some infinite readings on my meter, even on the 2000k Ohm setting. I just get a "1" at the beginning and nothing else...I am guessing that is infinite. I checked the board for unsoldered components, solder bridges, and the like, and found nothing.
Here are the readings I am getting on both boards. Could someone verify that my numbers jive with what I should be getting? CONTROL P2-1==>Infinite U5-5V==>14.85k U4-8V==>3.49k Q1 collector==>Infinite Q2 collector==>Infinite U3-8==>1003k (would that be 1.003 M Ohms?????) U6-13==>Infinite U6-14==>Infinite U6-29==>96.6k U6-30==>96.7k U8-2==>Infinite U8-15==>Infinite U8-16==>Infinite FRONT PANEL U1-1==>29.2k U1-2==>29.2k U1-3==>48.2k U1-4==>Infinite U1-5==>24.6k U1-6 to 11==>Zero/Ground U1-12==>9.85k U1-13 to 40==>Infinite J1-1 to 7==>Infinite J1-8==>Zero/Ground J1-9 to 14==>Infinite J1-15==>33.7k J1-16==>29.2k J1-17==>29.2k J1-18==>24.6k J1-19==>2.67k J1-20==>Zero/Ground As always, thanks for the help!! 73, David, KC9EHQ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
