Hi Roger, Sounds like the M1 key got programmed to activate the Config menu 2 Tone. You can try to recover the messages keys by the following:
8.3.4 Message Memories and Programmable Function Keys As Section 8.1.1 above describes, M1 - M4 and M1 - M4 can be used programmable function keys and macro keys. When they are, you cannot use them for message keys, but any pre-recorded messages saved for these keys can be recovered. 1. Switch to CW mode. 2. Tap REC. 3. Then tap the buffer you would like to restore (M1 - M4). 4. Then tap REC again. 5. Switch back to SSB mode. Once you have done this, M1 - M4 and M1 - M4 are restored to playing and repeating messages. (From page 208, "The Elecraft K3: Design, Configuration, and Operation"). Fred Cady fcady at ieee dot org " The Elecraft K3: Design, Configuration, and Operation" www.ke7x.com > -----Original Message----- > From: [email protected] [mailto:elecraft- > [email protected]] On Behalf Of Roger Dixon > Sent: Tuesday, August 09, 2011 7:40 AM > To: [email protected] > Subject: [Elecraft] Restore Digital Voice Recorder key functions > > During a recent contest some random sequence of key presses managed to > turn > the DVR M1 button into a two-tone generator on/off button. Nice > feature - > but not required! > > Is there an easy way to restore the M1 key functionality? > > Roger - G4BVY > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
