"I have a problem Houston"! I've tried to program my memory channels for DATA-A mode to reflect a change in DATA MD, and its not taking it.
I re-programmed the memory in question to CW mode to clear the memory mode and uploaded it to the K3 successfully,. Next I selected the memory on the radio using M>V button and rotating VFO-A. Then I changed mode from CW to DATA-A and DATA MD to the sub mode I want to program. Then I change the mode in Editor from CW to DATA-A and select that memory ID and Send Selected. DATA-A is saved but not the DATA-MD that I wanted. Every time I send from the Editor is puts AFSK A on LSB with 45bps bw. The only DATA mode I want to use is DATA-A USB. The editor is writing to the K3 because I see the activity deleting and writing. It is connected with the same COM$ that I use for the K3 Utility program which runs properly. I even upgraded Editor to vers. 1.0.203.0 which is the current version available on the Elecraft website. So what is the secret "handshake"? Right now I am suspecting the K3 cpu is in league with Bill Gates and "resistance is futile"! 73, Ed - KL7UW, WD2XSH/45 ====================================== BP40IQ 500 KHz - 10-GHz www.kl7uw.com EME: 50-1.1kw?, 144-1.4kw, 432-100w, 1296-60w, 3400-? DUBUS Magazine USA Rep [email protected] ====================================== ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
