Ed, Can I suggest a work-around while you are waiting for the K3 memory editor to be changed. Note that what I see in the K3 Frequency Memory Editor is just a selection of DATA mode - I do not see the selection of the data sub-modes nor the selection of which sideband is to be used in DATA mode.
Store all your memories with the K3 Memory Editor, then back at the K3, retrieve the DATA mode memories one by one, change the DATA MD and store them back using the K3 buttons. I have entered memories in my K3 manually and they do stay in the correct DATA-A submode. 73, Don W3FPR On 8/18/2011 5:03 AM, Edward R. Cole wrote: > "I have a problem Houston"! > > I've tried to program my memory channels for DATA-A mode to reflect a > change in DATA MD, and its not taking it. > > I re-programmed the memory in question to CW mode to clear the memory > mode and uploaded it to the K3 successfully,. Next I selected the > memory on the radio using M>V button and rotating VFO-A. Then I > changed mode from CW to DATA-A and DATA MD to the sub mode I want to > program. Then I change the mode in Editor from CW to DATA-A and > select that memory ID and Send Selected. DATA-A is saved but not the > DATA-MD that I wanted. Every time I send from the Editor is puts > AFSK A on LSB with 45bps bw. The only DATA mode I want to use is DATA-A USB. > > The editor is writing to the K3 because I see the activity deleting > and writing. It is connected with the same COM$ that I use for the > K3 Utility program which runs properly. > > I even upgraded Editor to vers. 1.0.203.0 which is the current > version available on the Elecraft website. > > So what is the secret "handshake"? Right now I am suspecting the K3 > cpu is in league with Bill Gates and "resistance is futile"! > > > 73, Ed - KL7UW, WD2XSH/45 > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
