My mistake in typing....it is in the "out" jack of the k3....sorry.
If you don't change direction you WILL arrive exactly where you're headed!! Susan Meckley, Skipper W7KFI-mm AFA9SM USSV DHARMA ________________________________ From: Jeff Cochrane - VK4BOF <[email protected]> To: ussv dharma <[email protected]>; [email protected] Sent: Saturday, October 1, 2011 10:50 PM Subject: Re: [Elecraft] pactor on k3 Change the audio lead to Line Out on the K3. That *should* fix the issue. 73 de Jeff Cochrane - VK4BOF East Innisfail QLD, Australia K3 #4257, KPA500 #161, P3 #1216 ----- Original Message ----- From: "ussv dharma" <[email protected]> To: <[email protected]> Sent: Sunday, October 02, 2011 6:21 PM Subject: [Elecraft] pactor on k3 Aloha: Prior to sending k3 to elecraft for updating I worked Pactor with no problems. Multi connector of Pactor Modem .....to "RS232" on back of k3 RCA Ptt of Modem..............................to PTT IN on back of k3 Audio of Pactor Modem.......................to line in (stereo) on back of K3 Now however, I can still do psk31 with no problem, but can not get any output when trying to use pactor. I hear everything swithcing, but no power out COMMENTS>>.....HELP If you don't change direction you WILL arrive exactly where you're headed!! Susan Meckley, Skipper W7KFI-mm AFA9SM USSV DHARMA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
