I noticed this at Field Day. The club was using a repeater with output on 146.625. As soon as I turned on the K2 we got hash on that frequency. Since then I have checked it at home with no computers anywhere around and confirmed the problem.
I have the PA and the KAT100 in the EC2. A short cable connects the KIO2. It has the pin 1 ground to the shield connected at both ends. A longer cable runs from the connector on the K2 to the PC, with the shield only connected at the K2. I verified that the combination that produces the noise is the K2 alone with the cable connected to the KIO2. In other words the PC and the PA are off and not connected and I still get the noise. My cable looks like the one on this page: http://www.kk7p.com/k2kpa100.html Any suggestions for tracking this down? Thanks, Sam N4MAP _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
