I don't think turning off the sub will do the job - the antenna is still connected to the receiver input. There are devices available to remove the antenna during transmit, but I would tend to make up my own. A relay that is activated by the K3 KEY OUT line would be quite able to do that task.
The relay does not have to be very large since it only handles the RX antenna. The relay contacts simply open the path between the K3 antenna input and the RX antenna, and closes that path for non-transmit. 73, Don W3FPR On 10/9/2011 2:04 PM, tomb18 wrote: > Ok, so the click should be audible? Is it like the other clicks i.e. the > antenna tuner? Wouldn't a good option be to turn off the sub while > transmitting during diversity mode? Could this be done in firmware? > I'm really liking the diversity mode for the faint dx. > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/Diversity-receive-with-ant1-and-ant2-tp6871758p6874855.html > Sent from the Elecraft mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
