For what it is worth, Wayne said that beta helped the problem with HRD turning off the K3 AGC. My understanding is that this is not a problem with HRD when LP-Bridge is in the picture too - but then I am going only by the few reports that I have seen in passing. As far as I know, the AGC off problem only occurs with HRD connected directly to the K3 and not through LP-Bridge.
You might want to also post your problem to the LP-Pan Yahoo group - that is where most of the questions related to LP-Bridge are aired. 73, Don W3FPR On 11/3/2011 7:54 PM, ai6ii wrote: > Downloaded and install the new beta 4.42 for the K3 and have started getting > a failure with LP Bridge "The object involved has disconnected from its > clients" - the two clients are HRD on VCP#1 and Commander on VCP#2. LP > Bridge stops interfacing with the K3 which in turn upsets HRD - it sends a > message that it is no longer communicating with the K3. > > Anyone else run into this? I am gong to back off the beta and see if the > problem goes away. > > ..mike AI6II > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
