You have vox turned on? Mike W0MU
J6M CQ WW DX CW Contest 2011 J6/W0MU November 21 - December 1 2011 W0MU-1 CC Cluster w0mu.net On 11/3/2011 8:46 PM, Doug Shields wrote: > Hello everyone, > > I am sure there is a simple and thoroughly obvious answer to this but I > haven't found it. I have a K3 connected to a Signalink USB interface. I am > using the specific K3 cable that plugs in to the speaker and mic jacks on > the K3. I believe I have the internal jumpers on the Signalink set > properly. I have adjusted the sound card levels as recommended. > > I can receive everything and decode signals just fine using Ham Radio > Deluxe. I just can't transmit any digital modes. I have tried many > combinations of settings with no luck. The K3 goes into transmit but I get > no indication of RF output. It works fine on CW and SSB. > > What am I missing? Thanks in advance. > > > > Doug W4DAS > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
