Hi Mike... Just to give you another data point, I have no problems doing the TX Cal on 6 meters. Using about a 6 foot length of RG-213 to an old Heath Cantenna. Works fine at both 5 watts and 50 watts. Good Luck... 73, Ken K3IU ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ On 11/8/2011 12:46 PM, W0MU Mike Fatchett wrote: > I have emailed support but was curious if others have seen this issue. > > I was seeing a few spikes on the KPA500 so I decided to do the TX > Calibration. I have all the bands in good order except for 6m where the > output will not go above 3.6 watts on the 5W calibration or above 48ish > on the 50watt. > > I am going to try another cable and dummy load just for curiosity. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
