This was measured on the K3 doing the TX gain adjustment. It fails and gives an error message.
Mike W0MU J6M CQ WW DX CW Contest 2011 J6/W0MU November 21 - December 1 2011 W0MU-1 CC Cluster w0mu.net On 11/8/2011 11:01 AM, n...@speakeasy.net wrote: > Mike...do you have confidence in your power meter's accuracy? (or was the > power > measured on the K3? > > > John > > > > > On Tue Nov 8 9:46 , W0MU Mike Fatchett<w...@w0mu.com> sent: > >> I have emailed support but was curious if others have seen this issue. >> >> I was seeing a few spikes on the KPA500 so I decided to do the TX >> Calibration. I have all the bands in good order except for 6m where the >> output will not go above 3.6 watts on the 5W calibration or above 48ish >> on the 50watt. >> >> I am going to try another cable and dummy load just for curiosity. >> >> >> -- >> Mike W0MU >> >> J6M CQ WW DX CW Contest 2011 >> J6/W0MU November 21 - December 1 2011 >> W0MU-1 CC Cluster w0mu.net >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
