Charles, The Edgeport/4 that I mentioned connects with a USB cable, you should have USB ports on your laptop.
73, Don W3FPR On 11/9/2011 4:08 AM, Charles wrote: > Hi Don, > Thanks again for your prompt reply. > Not all laptops available today have a card slot. > I am using the ACER 5724Z which does not have a card slot. > > Referring to page 21 of the KPA owner's manual, I am using the KPA/K3 AUX > Cable. > If I want to upgrade the firmware on all three units (K3, P3, and KPA) then > can you or Elecraft recommend a permanent configuration of serial cables > that will enable such a requirement? > It seems to me that if there is no answer to my last question then I will > need to change the serial cable connections for each unit every time that > I need to upgrade the firmware. The alternative is to take the advice of > Fred Cady on page 247 of his excellent manual. > > Many thanks once again for your valuable help Don. > 73 from Charles - M0BIN > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
