All, I have a relatively new K3, firmware version 4.39. When setting split around 10.110 MHz CW, I noticed the amber delta-f indicator not lighting when entering split mode. The unit clearly showed split mode on LCD display with the TX pointing to the secondary frequency, with TX frequency a few kHz up the band. I had been trying to dig an extremely weak signal out of the noise, and had disabled the subreceiver briefly to try to pick up a little extra gain. I don¹t remember if the light had actually ever lit.
As a test, I enabled RIT and XIT. The indicators around that encoder worked, but still not delta-f below the power button. I was able to restore functionality to the delta-f indicator when power cycling the K3. Having been a former Kenwood user, I¹m used to having the display frequency change on transmit in split mode, so not sure really split is working or not when this indicator does not work. Sometimes I forget to disable split when done with it and embarrass myself, so I need all the help I can get! Any ideas? (No running PC attached to K3 at the time, so HRD or other logging S/W not an issue this time around. I do have P3 with latest F/W attached.) Thanks and 73, Dan Sherwood WA6PZK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
