Cable from SteppIR is the S-13. I have the Y-cable as well but first just trying to get the SDA to track the radio. The K3 has been working fine with DX-Lab logger and controller but not worried about that yet. Tell me about AI, can't find that in the manual.
Thanks! ________________________________ From: "Joe Subich, W4TV" <[email protected]> To: Jack Berry <[email protected]>; Elecraft Reflector <[email protected]> Sent: Fri, November 25, 2011 3:33:09 PM Subject: Re: [Elecraft] K3/SteppIR setup Elecraft uses a modified Kenwood protocol. Have you enabled AI mode in the K3 and is a logging program running? What cable are you using to connect the K3 to SDA-100? Is the SDA-100 "Auto" mode turned on? 73, ... Joe, W4TV On 11/25/2011 4:27 PM, Jack Berry wrote: > Should the Orion or Kenwood mode be selected when using the K3 with SteppIR's > SDA-100 controller? Can't get it to work with either mode, just thought I would > check with the list. > > Thanks! > Jack - WE5ST > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
