The SPE Expert has the standard BCD band data interface as well. You can just feed the band data outputs of the K3 to the SPE Expert and not even use the RS232 interface.
Phil - AD5X "Good morning all. I have seen some postings of EXPERT 1k users here on the reflector, I need your help. A friend has a K3 and a P3. Now he wants to connect his EXPERT PA to this combo. The problem: The K3 RS232 is occupied by the cable to P3, both P3 RS232 are occupied by Cables to k3 and PC. Because he wants to use the Expert with different Antennas on different bands, he wants the K3 to tell the EXPERT on which band it should work. But how? I personally have a K3/P3/KPA500, so I can´t try to find a solution. Peter, DL2FI" ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
