This is the way I have my K3/P3 combination connected to the 1k-FA, and it works well.
Stewart G3RXQ On Mon, 28 Nov 2011 07:00:26 -0600, Phil & Debbie Salas wrote: > The SPE Expert has the standard BCD band data interface as well. You can > just feed the band data outputs of the K3 to the SPE Expert and not even use > the RS232 interface. > > Phil - AD5X > > "Good morning all. I have seen some postings of EXPERT 1k users here on the > reflector, I need > your help. A friend has a K3 and a P3. Now he wants to connect his EXPERT > PA to this > combo. The problem: The K3 RS232 is occupied by the cable to P3, both P3 > RS232 are occupied by Cables to k3 and PC. Because he wants to use the > Expert with different Antennas on different bands, he wants the K3 to tell > the EXPERT on which band it should work. But how? I personally have a > K3/P3/KPA500, so I can´t try to find a solution. Peter, DL2FI" > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
