Gary, I would first re-solder the leads of the LCD display. That kind of problem (lack of one or two specific segments) is a problem between the driver output and the LCD - a very short path.
If re-soldering the LCD does not cure it, the next step is to replace the driver IC and lastly, replace the LCD itself. 73, Don W3FPR On 12/15/2011 5:33 AM, Gary Swain wrote: > Can anyone advise? > > My K2 has suddenly developed a problem in that the display is missing 2 > "lights". It's the same 2 all the time, namely, when on 80mtrs its the 2 > that form the spine of the number 3 or the upright on the number 7 when on > 40mtrs etc. Any ideas? I do hope I don't have to change the whole > screen!!!!! > > Gary, 2E0BFJ > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
