Hi all, New builder here having troubles with no receive during alignment of the receive section. Here are the details:
-K1 #869 -RF board rev. D -2 band filter board with 40m and 30m installed -wide tuning range chosen -no tuner (I have the board built but it is not installed) Jumper between pin 2 and 10 on RF board is in place -resistance checks on the filter, front panel, and RF boards check out -voltage checks on the RF board check out When going through testing and alignment, everything is good up until receive. I can hear background hiss, and a faint but noticeable random data sound. The background hiss and data sound do not change at all when rotating the VFO knob. When I increase or decrease the RF gain, the background hiss and data noise also increase or decrease. -all LED's, the display, menus, VFO, and RF gain knob all appear to be working as they should. I have tried searching the reflector archive with no results. Thank you for any help you can offer. Mike KD0MEQ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
