Does this only happen when the rig is keyed, or does it also happen when you adjust pwr when K3 is in RX mode. If it ONLY happens when you adjust AND rig is TX, be sure you aren't suffering from RF in the shack. RF in the shack often presents as something totally weird, that doesn't seem to make any sense.
73, Guy On Sun, Dec 25, 2011 at 1:30 PM, Ron D'Eau Claire <[email protected]> wrote: > Skipper, I believe that can be caused by a bad connection in the antenna > system changing the load on the amp. That would explain the factory not > seeing that behavior. > > I believe you are using a K3. > > Does it do that when connected to a dummy load (use a different > cable/adapter than you use to connect to your antenna)? Be sure the KAT3 > tuner is bypassed (if you have it). > > Ron AC7AC > > -----Original Message----- > when adjusting the knob (power level) the value jumps up, down, slow, fast, > all over the place. Sent rig back for upgrade ...came back and this is > still a problem...anyone else have this? > > > If you don't change direction you WILL arrive exactly where you're headed!! > > Susan Meckley, Skipper W7KFI-mm AFA9SM > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
