Presumably you are talking about a K3 Don :-) It appears that what's different is that you switched sidebands.
Have you entered the filter offsets indicated on them (or, if using the 8-pole filters are the offsets all zero)? Ron AC7AC -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Baucom Sent: Saturday, February 11, 2012 2:04 PM To: elecraft@mailman.qth.net Subject: [Elecraft] #7261 passes Alignment and test part II I am happy to report everything seems to be fine with the receiver. All measurements went well and I enjoyed listening to some cw. I thought the receiver ws spot on 7.020 when I hooked up the XG3. I did all of the alignement steps before I hooked up the XG3. After that, I played around with the receiver switching filters and moving around the band. I then put it on LSB and listened to some SSB.. I was about to wrap up when I decided to hook up the XG3 and check it again. Now the 7.020 signal is strongest at 7.0215. ( using FL2 with out any changes to the settings) I wonder what I did. Perhaps I just thought the signal was on 7.020 and it was strongest on 7.0215 the whole time. Should I try to correct this or worry about it after I finish the transmitter section? Thanks 73 Don K4YND ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
