Yes. The trick is to set the XVxADR config item to either Int. trnX for internal 144 IF use or trnX for the external 28MHz transverter. Both can be set to display the same or different RF dsiplay frequency. Setting Int.TrnX always uses the 144 internal transverter. The choice of the value of X in Int. TrnX is for external band decoder type use.
In my case I use my XV144 external transverter along side the Internal 144MHz tranverter. Great for perforamnce comparisons. I also use the internal xverter as the 144MHz IF for my DEMI 903 and 1296 units. I use the KRC2 band decoder to sort out my PTT routing from the K3. I also have the XV222 and XV432 in my stack, all controlled through the KRC2 along with amps amd mast TR relays. - Mike -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Using-the-K144XV-to-drive-higher-microwave-transverters-tp7331198p7331991.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
