Thanks Mike - and Dick, who replied off-list. Much appreciated both! I suspect the order will go in soon...
73, Rob, M0VFC On 01/03/2012 13:36, [email protected] wrote: > Yes. The trick is to set the XVxADR config item to either Int. trnX for > internal 144 IF use or trnX for the external 28MHz transverter. Both can be > set to display the same or different RF dsiplay frequency. Setting Int.TrnX > always uses the 144 internal transverter. The choice of the value of X in > Int. TrnX is for external band decoder type use. > > In my case I use my XV144 external transverter along side the Internal > 144MHz tranverter. Great for perforamnce comparisons. I also use the > internal xverter as the 144MHz IF for my DEMI 903 and 1296 units. I use the > KRC2 band decoder to sort out my PTT routing from the K3. I also have the > XV222 and XV432 in my stack, all controlled through the KRC2 along with amps > amd mast TR relays. > > - Mike ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
