I have a K2/10 connected to a KAT100 and KPA100, both enclosed in the external EC2 enclosure. Works great, thanks to Don in Wake Forest. I just acquired a used XV 50 and have been trying to connect it to my K2 setup. I can't figure out how to connect the antenna output from the transverter to my 6 meter dipole. I have the antenna 1 port from the K2 going to the EC2, and two antenna ports from the EC2 going to antennas. I control antenna 1 and antenna 2 on the EC2 with the K2 antenna switch/button; this is normal. I now have a free antenna 2 port on the K/2 and the single antenna port on the XV50. The instructions ((XV50,K60XV (which I have and use with the transverter) and K2)) indicate the coax to the 6 meter antenna should be directly from the transverter. That doesn't seem to work. How does the K2 know which antenna port to use? Should I use antenna 1 or antenna 2 switch on the K2? The antenna 2 output on the K2 is not connected to anything now based on the way it is connected to the EC2; K2 uses only antenna 1 port although ports 1 and 2 are used from the KPA100 to antennas. Thanks. Ron
-- View this message in context: http://elecraft.365791.n2.nabble.com/K2-XV50-Transverter-Antenna-Connection-tp7338520p7338520.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
