the big difference with using the VE7CC pgm to access the VE7CC cluster or using DXLabs spot collector to access the VE7CC cluster
With VE&CC pgm if you click on a spot which has a split info entered in the comment field in VE7CC the K3 will change VFO A to the spotted frequency but does not change the K3's VFO B to the split frequency nor does it place the K3 into split operations if you are using DXLabs spotcollector and commander and click on that same spot the K3 shifts the VFO A to the DX frequency it also changes the VFO B to the split frequency and places the K3 into split operation also if you have the 2nd receiver installed VFO B is also placed in sub hope I said all that correctly GB & 73 K5OAI Sam Morgan On 3/9/2012 2:55 PM, Jim McDonald wrote: > I agree and wanted to mention that you can choose any telnet cluster in the > Configuration-->Cluster (Telnet) list. I prefer a node that uses VE7CC's > node software, CC Cluster. Telnet clusters are much more configurable than > web clusters and send spots real-time rather that at pre-set intervals. > > I use CC User to feed the DXLab Suite, http://www.dxlabsuite.com/ , but CC > User used standalone can interface with a K3 (it's in the Port Setup > window). > > http://www.ve7cc.net/ > > 73, Jim N7US ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
